22 Nov 2017, 21:40

Mac Mini + Centos7

I recently had a need to install Linux on a 2014 Mac Mini. Naturally I chose Centos! 😄 I had some trouble finding a straightforward HOWTO to follow, so for the benefit of others wanting to do the same thing, here are the steps I took:

  • download the latest Centos 7 minimal ISO, and transfer that to a USB stick using dd e.g.
sudo dd if=CentOS-7-x86_64-Minimal-1708.iso of=/dev/sdb bs=8M
  • insert the USB stick into the Mac Mini
  • (re)boot the Mac Mini and hold the C key down immediately after power on - this will take you to a boot disk selection screen
  • select the USB stick (labelled ‘efi’) and proceed to boot from it
  • from here is a standard Centos install routine, with the exception of disk partitions:
    • peform a manual disk partition setup.
    • You should see 3 existing logical partitions: the EFI partion, the partition holding the existing MacOS install, and a recovery partition of around 600MB.
    • wipe the MacOS partition and add your Centos mountpoints there as required. (keep the MacOS recovery partition in case you want to revert back in future)
    • ensure that the existing EFI partition gets mounted to /boot/efi
  • proceed with Centos install

Something odd I noticed was that the onboard NIC did not show any link light when plugged in, however the network was connected (after I ran dhclient to get an IP).